Retired Products

Welcome to the RCT Retirement HomeAs the AquaGuard family of products expands and advances it is inevitable that the older generation will need to move over and make way for the new. Although these pioneers of reliable HVAC water sensing are moving on to greener pastures, they can still be honored and remembered for the great work they have accomplished in their time in the field. Take a look for nostalgias sake or if you are still the proud owner of one of these guys and have no need to upgrade yet, you can find information on them here.

AG-1100 Water Sensing System

The AG-1100 can be mounted to a metal drain pan in 10 seconds or less, without drilling a hole in the pan. You only need to tighten 3 thumbscrews to mount it on a metal pan. UL 508 listed.

AG-1100m Magnetic Water Sensing System for Metal Secondary Pans

The AG-1100m is an incredibly easy to install high-amperage switch that can be quickly mounted to the pan. Installation does not require a hole in the pan. The AG-1100m is fully adjustable and can be installed in any corner of the pan to accomodate the lowest point where water will flow. UL 508 listed.

AG-1200 Water Sensing System

The AG-1200 can be mounted to a metal or ABS drain pan in 10 seconds or less, without drilling a hole in the pan. The innovative two-piece ratcheting design of the AG-1200 allows it to be mounted on an plastic pan (with a lip) or on a metal pan (without a lip). UL 508 listed.

AG-1250m/1300m Magnetic Sensor for Secondary Pans with a 3/4" Drain Hole

The AG-1250m/1300m can be mounted to a metal or ABS drain pan in 10 seconds or less. The AG-1300m is an adjustable, high-amperage float switch that can be used in any metal or plastic pan with a standard 3/4" drain hole. UL 508 listed.

AG-2500 Water Sensing System for In-Line SecondaryDrains

The AG-2500 switch is located outside the normal flow of water to insure greater reliability with less exposure to debris and clogging. It can handle up to 250 gallons of condensate per day. UL 508 listed.

AG-3100 Water Sensing System

The AG-3100's exclusive locking design keeps switch aligned properly. The unique design of the switch has no vent hole, thus providing a safer air supply and greater A/C air-handler efficiency. System includes innovative locking 3/4-inch adapter. UL 508 listed.

AG-3500 Water Sensing System for In-Line or Auxiliary Sensor Kit

The AG-3500 can be used as an in-line or auxiliary switch. It comes with time-saving adapters for almost every situation. The in-line installation can be horizontal, vertical or angled. Auxiliary installation will adapt to any air handler with enclosed fittings (female thread, male thread or pipe fitting). The switch is located outside normal flow of water to insure greater reliability with less exposure to debris and clogging. The in-line configuration can handle up to 250 gallons of condensate per day. The AG-3500 also includes the AquaMate in-line maintenance and clean-out port. UL 508 listed.